• Purrito Burrito Cat embroidered iron-on patch
  • Purrito Burrito Cat patch on denim jacket
  • Purrito Burrito Cat measurements

Purrito Burrito Cat Embroidered Iron-On Patch

$ 10.00
$ 10.00
Sold Out
Shipping calculated at checkout.

There are few problems that a warm, soft tortilla can’t solve. The problem of boring jackets, bags, and beanies is no exception. Add some spice to your life and your backpack with the impossibly cute Purrito iron-on patch. This colorful patch features a cozy kitten wrapped up like a burrito, but don’t worry, no cats were harmed in the making of this patch.

Deets:

  • Embroidered patch
  • Polyester thread
  • Iron-on backing
  • Includes one patch only
  • Measures 2.5"H x 1.47"W

IRON-ON PATCH INSTRUCTIONS

  1. Preheat your iron: Set your iron to a medium to high heat setting.

  2. Prepare the garment: Ensure that the garment or fabric item you plan to attach the patch to is clean and free from wrinkles. Lay it flat on a hard, sturdy, and heat-resistant surface.

  3. Position the patch: Place the embroidered iron-on patch face up wherever you'd like.

  4. Protect the patch: Place a thin cloth or cotton fabric on top of the patch before ironing. This prevents direct contact between the iron and the embroidered surface.

  5. Apply heat: Place the hot iron on top of the patch, directly over the design. Apply firm, even pressure without moving the iron around. Hold it in place for about 45 seconds.

  6. Apply heat to the back: Turn garment inside-out and place the hot iron on the back of the patch, directly over the design, for about 30 seconds.

  7. Check the adhesion: Carefully lift the corner of the patch to see if it adhered to the fabric. If the patch lifts off, place it back down and reapply heat for a few more seconds until it firmly sticks.

  8. Allow to set: Let the patch and garment to cool down for a few minutes. Avoid touching the patch while it's still warm, as it may not have fully bonded to the fabric yet. It's generally recommended to wait at least 24 hours before washing to ensure maximum durability.

Note: If you've followed the above steps and your patch is still not sticking, it might be worth considering alternative attachment methods such as sewing or using fabric glue.

Please contact us at hello@winksfordays.com with any questions.

Winks For Days Iron-On Embroidered Patch Instructions